Vaporesso XROS 5 vs XROS Pro vs XROS 6: Specifications and Differences

Overview of the Vaporesso XROS Series

The Vaporesso XROS 5, XROS Pro and XROS 6 are refillable pod-device variants within the Vaporesso XROS series. Their published technical specifications cover battery capacity, output settings, charging connections, display functions, airflow controls and cartridge compatibility.

Although the devices share the XROS product family, their specifications and package contents differ. Information can also vary by regional version, so the exact product documentation should be checked before relying on individual specifications.

 

Important: This article is provided for general information about vaping terminology and device characteristics. Vaping products are regulated in New Zealand, and vaping is not risk-free. Vaping products are intended for people aged 18 and over.

 

Vaporesso XROS 5 vs XROS Pro vs XROS 6: Specifications Compared

The following table summarizes the specifications supplied for the three variants.

 

 

Vaporesso XROS 5 Specifications

The Vaporesso XROS 5 is specified with a built-in 1500mAh battery and COREX 3.0 heating technology.

The product information lists 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω cartridge options, with 2mL and 3mL pod capacities depending on the cartridge version. Airflow is adjusted through a side-mounted slider.

The display provides device information, including battery level, wattage, lock status and puff count. The XROS 5 vape pod has a five-click locking function and automatic deactivation following ten minutes of inactivity.

USB-C charging is listed at 5V/3A in the original product information. 

Vaporesso XROS Pro Specifications

The Vaporesso XROS Pro is a refillable pod-device variant with a listed maximum output of 30W and a built-in 1200mAh battery.

The vape pod contains two 0.4Ω mesh pods, one installed and one spare. The cartridges are listed as 3mL top-fill pods, and the device includes a display, battery-level indicator and adjustable airflow.

XROS Pro specifications list Type-C charging at 2A to recharge the vape battery. 

Vaporesso XROS 6 Specifications

The Vaporesso XROS 6 is specified with an internal 1800mAh battery and adjustable output from 15W to 30W.

The supplied product information identifies COREX 3.0 technology and 3mL top-fill pods. The package described contains a pre-installed 0.4Ω mesh pod and a spare 0.6Ω mesh pod.

Its listed control specifications include a 0.88-inch TFT screen, Venturi adjustable airflow, auto-draw activation and button activation. USB-C charging is also listed, with a charging rate that should be verified against the relevant manufacturer's documentation.

Battery Capacity and Output Specifications

The supplied battery capacities are 1500mAh for the XROS 5, 1200mAh for the XROS Pro and 1800mAh for the XROS 6.

The XROS Pro comes with a maximum output of 30W, while the XROS 6 has an adjustable output range of 15W–30W. The maximum output specification for the XROS 5 should be confirmed from an authoritative product source before publication.

Battery capacity and output are separate measurements. Battery capacity alone does not establish actual operating time, which can depend on usage, settings, cartridge resistance and battery condition.

Charging Specifications

All three variants use a USB-C charging connection according to the supplied product information.

The original specifications list 5V/3A charging for the XROS 5, 2A charging for the XROS Pro and charging up to 15W for the XROS 6. These figures should be checked against current manufacturer documentation before being published as confirmed specifications.

Charging equipment should meet the manufacturer's requirements. Do not charge a device that shows signs of battery damage, leakage, swelling or persistent overheating.

Cartridge Compatibility and Resistance

The XROS series uses refillable cartridges with integrated coils. With this cartridge design, the coil is part of the pod rather than a separate component fitted inside it.

The resistance configurations are as follow:

• XROS 5: Listed resistance options of 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω.
• XROS Pro: Two included 0.4Ω 

Place in the Vaporesso Range

XROS is Vaporesso’s refillable pod line for MTL use. It remains distinct from other options in the Vaporesso range, including pod mods and sub-ohm kits, because these devices centre on the shared XROS cartridge format.

Final Comparison

The Vaporesso XROS 5, XROS Pro and XROS 6 share the same XROS pod-device range, but their specifications differ in several areas. Battery capacity ranges from 1200mAh on the XROS Pro to 1800mAh on the XROS 6, while the XROS 5 covers a wider selection of listed pod resistances from 0.6Ω to 1.2Ω.

The XROS Pro package includes two 0.4Ω pods, while the XROS 6 comes with one 0.4Ω pod and one 0.6Ω pod. Display features, airflow controls and output settings also vary across the three models.

These differences outline how the XROS 5, XROS Pro and XROS 6 are configured, from battery capacity and cartridge specifications to device controls.